Welcome To Caroziir

Atomising Nozzles

ANTecC Technical Ceramics are principle manufacturers of high performance Zirconia Atomising Nozzles for use in the Powder Metallurgy industry. Atomising nozzles are available in a wide range of shapes and sizes, many to the requirements of individual customers. Applications include the casting and atomisation of Ferrous and Non Ferrous melts.
One of the principle features of ANTecC nozzles is their close dimensional accuracy, which promotes stable flow characteristics under the most arduous conditions. The addition of specially selected stabilising oxides provides high strength, excellent erosion resistance and minimal cracking due to thermal shock/rapid cooling.

Zirconia Crucibles

ANTecC Technical Ceramics manufactures a wide range of high performance Iso-statically pressed Crucibles based upon partially stabilised Zirconia. The properties of the finished product are determined by both the manufacturing method and the choice of stabilising media.

Alumina Crucibles

ANTecC Technical Ceramics Isostatically Pressed Alumina Crucibles offer resistance to high temperatures, while maintaining good erosion resistance. ANTecC Technical Ceramics manufactures a range of crucibles based on Alumina.

Laboratory Crucibles

ANTecC Technical Ceramics supply a wide range of high purity Alumina and Zirconia Laboratory Crucibles. Materials include high purity Alumina, Zirconia Toughened Alumina, Partially stabilised (PSZ) and fully stabilised Zirconia (FSZ).
In order to provide quality products ANTecC delivers materials of the highest quality to the market, competitively priced and backed by the expertise of application knowledge and the resources of the Carol Zircolite Pvt. Ltd.

Ceramic Pump Seal

In the transport of aggressive fluids, ceramic components provide exceptional resistance to corrosion, mechanical erosion and abrasion while maintaining their superior surface finish and fit.
With high wear and corrosion resistance, our Ceramics are compatible to high corrosive acids and alkalis except H3PO4 and HF. ANTecC also offers Ceramics with no Grinding Lead Marks for Cartridge Sealing application.
ANTecC offers high performance material solutions that have proven successful in a wide range of applications in pump industry.
We can manufacture seal parts as per your requirement. Our shaft protection sleeves are used by major pump manufacturers and every part can be made to customized for specific requirements.
Benefits:
High Purity Materials
High wear and corrosion resistance
High Hardness

ANTecC Advantages:
In-house manufacturing facility
State of Art manufacturing facilities
Dedicated production lines capable of consistent high quality output and mass production
Capability to manufacture special configured seals
Customised solutions for different applications.

Industries:
Industry
Process Industry
Oil and Gas Industry
Chemical and Petrochemical
Marine
Waste Water

Applications:
Pump Shaft Sleeves
Pump Plungers
Pump Cylinder Liners
Shaft and Bush Bearings for magnetic drive pumps
Piston for Metering and Dosing Pump
Thrust and Bush Bearings
Mechanical Seal Faces
Cartridge Sealing Application

Ceramic Cleaner Cones

Pulp and Paper manufacturing occurs under elevated temperatures and extremely low pH conditions. Abrasion, erosion, corrosion and heat present material selection challenges across the entire manufacturing process.

Installing advanced engineering ceramics in pulp and paper manufacturing plants can decrease wear and corrosion and increase energy efficiency.

High hardness and wear resistance, modulus of elasticity, comprehensive and flexural strengths have enabled the application of ceramic parts, where mechanical stresses are experienced.

Benefits:
High wear and Corrosion resistance
Frequent Replacement
High Hardness
Higher life than SS material

ANTecC Advantage:
In-house manufacturing capacity
Our CCC-92, CCC-96 and CCC-997 Grade Ceramics are available.
Capability to manufacture ceramic dewatering elements in-house with such precision
Customised solutions for different applications.
Excellent partner of choice for co-creation opportunities

Ceramic Pipe Liner

Choose your best ceramic pipe liner for next- level wear protection. Any pipe that is used to carry corrosive or abrasive fluids is exposed to abnormal wear and tear. The continuous flow of these media causes irreparable damage to its inside parts and fittings, which results in reduced performance and high maintenance costs. Pipe bends bear the brunt most often because it's where flurries, tailings, or whatever is being transported rapidly changes its direction. They are the hardest areas to reach and call for coatings made with pinpoint accuracy to fit them. Fortunately, ANTecC Ceramics and our range of ceramic pipe liners have got you covered. We do our utmost to design fillers in a variety of shapes to match the inside form of your piping and fittings. As of now, they are available as cones, cylinders, trapezoid tiles, rings, elbows, tubes, etc. This diversity allows you to pick the right ceramic pipe liner so that it can effectively minimize friction and damage associated with the flow of abrasive media. Even if you can't find a perfectly shaped coating for your applications, don't fret, at ANTecC Ceramics, we are capable of fulfilling orders with custom drawings to suit your specific requirements.

Arabsion resistant ceramics

High-grade 92%-99.7% alumina abrasion- resistant ceramic coatings Slurries, sand particles, and corrosion can all eat away at the structural integrity of metal parts, leading to their gradual destruction. But they can be adequately protected from such substantial damage and thus save you from downtime-related woes. Fine-grain 92-99.7% Al2O3 abrasion-resistant ceramic products from ANTecC Ceramics can act as a barrier between your metal surfaces and abrasive materials. They are proven to add to the efficiency of your equipment by preventing it from getting out of service due to excessive wear and tear. Thanks to their protective properties, our ceramic abrasion-resistant coatings have already found their way in many industrial applications. They can be used to complement the structural strength of coal feeders, renders, conveyor systems, ball mills, hoppers, pipes, and more. By helping these components remain up and running as long as possible, our products ensure a sense of reliability in your manufacturing procedures. No matter whether you're operating in the mining, coal, or steel industry, these fillers are your best fit to withstand the impacts of heavy-duty usage.

Engineering Ceramics

Advanced engineering ceramics that always fit your equipment. When it comes to demanding industrial applications where physical and thermal material properties are of importance, high-performance ceramic solutions are a must-have. Proudly serving coal producers and other companies for over years, we're in a position to provide you with the best of them. Our engineering ceramics encompass impressive impact resistance, hardness, and stiffness to withstand scorching temperatures and heavy-duty mechanical processes. They are also perfect for applications involving the use of chemicals to add a layer of effective corrosion protection for every piece of your equipment. Here you can take a look at various engineering ceramics of non-oxide and oxide types. But these are only a few of the many designs that ANTecC Ceramics can create for you. Striving to bring absolute precision to whatever you do, we can tailor-make all our ceramic engineering products according to your facility and equipment specifications. You only need to provide your custom drawings we will then ensure that our coatings seamlessly fit your machinery without further cutting. Once lined with our ceramics, your equipment will be better adjusted to stand the test of time in corrosion-, high temperature-, and wear-related environments. This will contribute to the efficiency of your industrial operations and minimize unexpected upkeep costs.

Ceramics Lined Equipment

One of the biggest challenges for heavy industries which deal with the highly abrasive environments is to protect the equipment themselves being eaten away by wear and corrosion. The complex geometries and high-speed dynamic interactions between the materials and equipment make the situation even worse. The most effective and accepted solution in industries is to line the equipment walls with ceramic tiles. However, sometimes it becomes really difficult to line the equipment walls after fabrication. To overcome this problem, we have developed superior fabrication capabilities to act as a one-point solution. By being able to switch the sequence of fabrication, lining and painting processes, we are able to execute lining for the most complex shapes. We take pride in providing innovative wear-protection solutions for complex industrial installations. We combine our lining skills with the correct choice of materials and process sequence. We work with our customers to develop, inspect and deliver to conform to our philosophy of “First time right”.

Products